DIY Cooking Temperature Meter: Difference between revisions
From wikiluntti
| Line 29: | Line 29: | ||
** https://nerd-corner.com/review-battery-shield-v3-diy-powerbank-with-lipo-18650/ | ** https://nerd-corner.com/review-battery-shield-v3-diy-powerbank-with-lipo-18650/ | ||
** https://www.youtube.com/watch?v=T70mBHeIOZA | ** https://www.youtube.com/watch?v=T70mBHeIOZA | ||
The battery shield connec | |||
Revision as of 14:58, 3 July 2026
Introduction
A simple (but updatable) cooking thermometer based on ESP32.
Functions
- Measure, log, display and save the temperature
- Send data using bt or create a local web server which shows the data.
- Allow taking timed photos (a photo at a given time) and show it on a (saved) temp log.
Material
-
The ESP 32
-
The front side of the ESP32 with the display
-
The battery shield from the front.
-
The battery shield from the back.
-
A sample file from the provider.
- ESP32: ideaspark® ESP32 Entwicklungsboard 1,14 Zoll 135x240 full color LCD-Display,CH340,WiFi+BL. ST7789 driver, I2C. CH340
- Display area: 14.864 × 24.912 mm2
- Panel size: 17.6 × 31.0 × 1.6 mm3
- Display current 20mA.
- Display ports: VCC: VCC, GND: GND, D2(GPIO2): DC, D4: RST, D15: CS, D18: SCLK, D23: MOSI, D32: BLK.
- Temperature probe; THERMOPRO copy (including TP20, TP17, and TP-16, TP-16S,TP08S, TP25, TP07, TP17H, TP27, TP06S, TP09, TP28). Max temp 380°C (716°F) with 3.5 mm stereo jack.
- Battery pack: Battery Shield V3 Raspberry Pi / Arduino / ESP32 - 1x 18650 (from FunDuino)
The battery shield connec
