Microscope and photo stacking
From wikiluntti
Introduction
Create a microscope with good magnification and automatically adjustable specimen board. Take automatically photos at different heights of the specimen board. Stack the photos using some methods.
Theory
We use Raspberry Pi 4 or Zero with 12 MP camera. The camera supports C and CS mount lenses (CGL 6 mm CS-mount and 16 mm C-mount lenses). Also M/CS mount adapter is available.
Screen
The small screen is a 3.5 inches TFT LCD capacitive touchscreen with a 480×320 resolution that supports up to 1920×1080. It is connected to the Raspberry Pi with a HDMI adapter for display, and to the GPIO port for the touchscreen function.
