Raspberry Pi

Setting Up The Raspian

Establish Wifi, Bluetooth.

Credentials are pi@raspberrypi.local and raspberry. KiTTY seems to be a good terminal.

Set Up WiFi without Screen

Into root directory:

• Add an empty file called ssh
• Add a file wpa_supplicant.conf which includes

country=ee 
update_config=1
ctrl_interface=/var/run/wpa_supplicant GROUP=netdev
network={
    scan_ssid=1
    ssid="YOUR_NETWORK_NAME"
    psk="YOUR_PASSWORD"
    key_mgmt=WPA-PSK
}

Note the (Notepad++: Edit) EOL conversion UNIX.

https://www.raspberrypi-spy.co.uk/2017/04/manually-setting-up-pi-wifi-using-wpa_supplicant-conf/

USB cable // Perhaps requires Zero

Connect via usb to gadget mode. After flashing RaspianOS. The following files are at boot-directory

• Modify config.txt: add dtoverlay=dwc2
• Add an empty file called ssh
• Edit cmdline.txt: Ensure that there exist rootwait modules-load=dwc2,g_ether.

Now you can ssh pi@raspberrypi.local if the usb cable is plugged in.

Bluetooth on Raspi 3

sudo apt update
sudo apt upgrade
sudo apt-get install python-bluez
#sudo apt install bluetooth pi-bluetooth bluez blueman

sudo nano /etc/systemd/system/dbus-org.bluez.service. Modify ExecStart=/usr/lib/bluetooth/bluetoothd –C

sudo sdptool add SP

sudo reboot

sudo apt-get install bluetooth bluez libbluetooth-dev
sudo python3 -m pip install pybluez

Raspi and VIM

sudo apt install vim
sudo apt install vim-nox
#Vundle
git clone https://github.com/VundleVim/Vundle.vim.git ~/.vim/bundle/Vundle.vim

vim ~/.vimrc

" Syntax highlight
syntax enable
" Tabs are spaces
set expandtab
" Number of spaces per tab
set tabstop=2
" Search as soon as characters are entered
set incsearch
" Highlight search results
set hlsearch

https://stackoverflow.com/questions/18948491/running-python-code-in-vim

https://scribles.net/enabling-python-autocomplete-in-vim-on-raspberry-pi/

Bundle 'Valloric/YouCompleteMe'

Raspi and Ev3-G

Pairing ev3 and Raspi

bluetoothctl
power on
discoverable on
scan on

trust <ev3 address>
pair <ev3 address>
quit

Device 24:71:89:BA:DA:61 ev3dev

It helps to restart Ev3.

[establish Bluetooth] connection, need to create the serial device that binds to the paired Ev3 robot:

sudo rfcomm bind /dev/rfcomm0 XX:XX:XX:XX:XX:XX 1

where the last number is the communication channel. It needs to be unique.

Some links

• http://www.geekdroppings.com/2018/01/21/raspberry-pi-and-the-lego-ev3-connected-by-bluetooth/
• https://www.hackster.io/KKE/raspberry-pi-lego-mindstorms-ev3-bluetooth-communication-aa42e2
• https://siouxnetontrack.wordpress.com/2013/09/27/connecting-the-pc-to-our-ev3/
• https://github.com/lehoff/ev3bt/

• 

  Maksym Shyte @ http://www.geekdroppings.com/2018/01/21/raspberry-pi-and-the-lego-ev3-connected-by-bluetooth/

• 

  Koen Kempeneers @ https://www.hackster.io/KKE/raspberry-pi-lego-mindstorms-ev3-bluetooth-communication-aa42e2

• 

  Hans Odenthal @ https://siouxnetontrack.wordpress.com/2013/09/27/connecting-the-pc-to-our-ev3/