CR-Laser Falcon 10W Creality
Introduction
| Header text | Header text |
|---|---|
| Machine Power | Max. 72 W |
| Laser Power | 10 W |
| Laser Spot | 0.06 mm |
| Laser Wave Length | 455±5 mm |
| Engraving Speed | Max. 10000mm/min |
| Engraving Area | 400mm×415mm |
| Certification | IEC60825, FDA, CE, RoHS, FCC, UKCA, UL, PSE |
| Control Software | LightBurn, LaserGRBL |
| Product Dimensions（L×W×H） | 568×632×198 mm3 |
| Laser Engraving Materials | Paper, Wood, Bamboo, Rubber Sheet, Leather, Fabrics, Acrylics, Painted Metal, Plastics, etc. |
| Laser Cutting Materials | Paper, Wood, Bamboo, Cloth, Leather, Fabrics, PVC, Acrylics, Plastics, etc. |
Enclosure
-
Not exact plans, but something. The blend file is File:Enclosure.zip
https://www.pinterest.com/pin/43558321378919713/
https://www.artofit.org/image-gallery/604186106280835560/diy-laser-enclosure/
https://www.instructables.com/Plywood-and-Acrylic-Laser-Enclosure-With-Exhaust-F/
https://glowlaserengraver.com/building-your-own-diy-laser-engraver-enclosure-a-step-by-step-guide/
Usage
Parameters
Engraving
| Material | Thickness (mm) | Power | Speed (mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 40% | 3000 | 1 |
| Bamboo | 5 | 40% | 3000 | 1 |
| Kraft paper | 0.2 | 25% | 3000 | 1 |
| Red card paper | 0.2 | 25% | 3000 | 1 |
| Red felt | 0.8 | 15% | 3000 | 1 |
| Brown leather | 0.65 | 20% | 3000 | 1 |
| Black acrylic | 4.5 | 50% | 3000 | 1 |
| Anodized aluminum | 3 | 100% | 200 | 1 |
| Stainless steel | 2 | 100% | 500 | 1 |
| White ceramic tile painted black | 6 | 95% | 3800 | 1 |
Cutting
| Material | Thickness (mm) | Power | Speed (mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 100% | 350 | 1 |
| 4 | 100% | 200 | 1 | |
| 5 | 100% | 150 | 1 | |
| 6 | 100% | 230 | 3 | |
| Bamboo | 5 | 100% | 230 | 3 |
| Black acrylic | 4.5 | 100% | 120 | 2 |
| Kraft paper | 0.2 | 100% | 3500 | 1 |
| Red card paper | 0.2 | 100% | 3500 | 1 |
| Red felt | 0.8 | 100% | 3500 | 1 |
| Brown leather | 0.65 | 100% | 1500 | 1 |
Online Box creators
Boxes, drawers, organizers.
https://boxes.hackerspace-bamberg.de/
https://3axis.co/laser-cut/drawers/
Air Assist
It is not recommended to use an air assist during engraving---it may cause the blown molten material to sputter over the workpiece.
https://www.instructables.com/DIY-Cheap-and-Quiet-Air-Assist-for-Laser-Cutting/
- Air pump (30L/min is more than enough
- Air tube (4mm inner diameter, 6mm outer diameter)
- resin printer
https://mellowpine.com/how-to-build-an-air-assist-for-your-laser/
- 0.5 - 1.0 hp (400-750) ; 150 psi (10 bar; 1 Mpa)
- An air pressure regulator with a filter to prevent moisture etc
https://endurancelasers.com/a-diy-air-assist-for-diode-lasers-fully-3d-printed/
- 0.05-0.1MPA pressure. and at least 60-70 L / min airflow
- ver 1.0: Airflow from the left side of the laser.
- ver 2.0: Airflw is directed exactly to the point of action of the laser
- https://www.thingiverse.com/thing:4067540 and https://www.thingiverse.com/thing:4516272 and https://www.thingiverse.com/thing:4544637
