Beam Electronics. Brass wire electronics

From wikiluntti

Revision as of 17:29, 25 March 2026 by Mol (talk | contribs) (→‎Introduction)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

Electronics and art.

https://bhoite.com/ for example, see https://bhoite.com/sculptures/photon2-lander/

https://www.youtube.com/@MohitBhoite/shorts

1/32″ (0.8mm) thick brass rods or bare 20 AWG (0.8mm) brass or copper wire.
Weller WES50 soldering iron, Hakko FX888D, or any 60W (and above) temperature controlled iron.

Retrieved from "https://wiki.luntti.net/index.php?title=Beam_Electronics._Brass_wire_electronics&oldid=15605"