Arduino radio hc-12

From wikiluntti
Revision as of 17:23, 20 January 2025 by Mol (talk | contribs) (Created page with "== Introduction == LoRa, hc12, hc-12 * Frequency band is from 433.4 MHz to 473.0 MHz * 100 channels with a stepping of 400 KHz between each channel * Transmitting power is from -1dBm (0.79mW) to 20dBm (100mW). A half-duplex 20 dBm (100 mW) transmitter * Receiving sensitivity is from -117dBm (0.019pW) to -100dBm (10pW) Connect a 22 µF to 1 mF reservoir capacitor in parallel with the HC-12 "Gnd" and "Vcc" pins. == Set == == Transmission Tx == == Receive Rx ==")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

LoRa, hc12, hc-12

  • Frequency band is from 433.4 MHz to 473.0 MHz
  • 100 channels with a stepping of 400 KHz between each channel
  • Transmitting power is from -1dBm (0.79mW) to 20dBm (100mW). A half-duplex 20 dBm (100 mW) transmitter
  • Receiving sensitivity is from -117dBm (0.019pW) to -100dBm (10pW)

Connect a 22 µF to 1 mF reservoir capacitor in parallel with the HC-12 "Gnd" and "Vcc" pins.


Set

Transmission Tx

Receive Rx

Retrieved from "https://wiki.luntti.net/index.php?title=Arduino_radio_hc-12&oldid=12943"