Generate pwm using ic 555: Add a diode

Method 2; Longer low time: Add a Diode

• 

  The schematics.

• 

  The simulations.

The added diode $D$ shorts the out the resistor $R_{2}$ during the charging cycle; thus the capacitor charges directly from $R_{1}$ removing $R_{2}$, though a small leakage current will flow through it. The constants are modified due to the voltage drop of $D$.

${\begin{aligned}T_{\text{on}}&=0.8R_{1}C\\T_{\text{off}}&=0.7R_{2}C\\f&={\frac {1.44}{(R_{1}+2R_{2})C}}\end{aligned}}$

$pwm\%={\frac {T_{\text{on}}}{T_{\text{on}}+T_{\text{off}}}}={\frac {0.8R_{1}C}{0.8R_{1}C+0.7R_{2}C}}$

The simulation file: File:555 diode 300 300.circuitjs.txt