Python v2
From wikiluntti
<languages />
<translate>
Python is a very powerful but programming language for ev3 robots, also.
Programming exercises (only five so far but these will give a solid ground to jump from):
- Steer left and right py v2
- Color sensor readings py v2
- Stop at line py v2
- Line follower Zigzag py v2
- Line follower proportional py v2
The other sensors work similarly; eg. gyroscope sensor py v2 or ultrasonic sensor py v2 (distance meter) are rather easy to employ.
Preliminary things
SD Card
To set ev3dev running you need a SD card which should be made bootable to ev3dev-stretch. The installation (copying) can be made using Etcher.
Connect to your brick. I usually use the USB cable, and it works by plugging.
See the SD card settings and instructions from ev3dev/getting-started page.
</translate>
