Diesel Cycle

Introduction

• 

  Diesel Cycle

• 

  Diesel Cycle

$\gamma ={\frac {C_{p}}{C_{v}}}$

1. Isentropic (adiabatic) expansion
2. Isochoric cooling (Qout): Heat rejection. Power stroke ends, heat rejection starts.
3. Isobaric compression: Exhaust
4. Isobaric expansion: Intake
5. Isentropic (adiabatic) compression
6. Isobaric heating (Qin): Combustion of fuel (heat is added in a constant pressure;)

Engine displacement is the cylinder volume swept by all of the pistons of a piston engine, excluding the combustion chambers. A combustion chamber is part of an internal combustion engine in which the fuel/air mix is burned.

Realistic Diesel Cycle

• 

  The size of the combustion chamber of MB W211.

Mercedes Benz W211 (2003)

• Engine displacement: 3222 cm³
• Bore x Stroke: 88.0 x 88.4 mm³
• Compression Ratio: 18.0

Bore x stroke gives V = 6xπ(8.8/2)² x 8.84 cm³ = 3225.95cm³, which is rather close.