Generate pwm using ic 555: Add a diode

Method 2; Longer low time: Add a Diode

• 

  The schematics.

• 

  The simulations.

• 

  The contour and surface plot of varying resistances.

• 

  Added the second diode. This will make the output identical if R₁ and R₂ are identical.

The added diode D shorts the out the resistor R_2 during the charging cycle; thus the capacitor charges directly from $R_{1}$ removing R_2, though a small leakage current will flow through it. The constants are modified due to the voltage drop of D.

${\begin{aligned}T_{\text{on}}&=0.8R_{1}C\\T_{\text{off}}&=0.7R_{2}C\\f&={\frac {1.44}{(R_{1}+2R_{2})C}}\end{aligned}}$

$pwm\%={\frac {T_{\text{on}}}{T_{\text{on}}+T_{\text{off}}}}={\frac {0.8R_{1}}{0.8R_{1}+0.7R_{2}}}$

which simplifies to $pwm\%\approx {\frac {R_{1}}{R_{1}+R_{2}}}$

The simulation file: File:555 diode 300 300.circuitjs.txt

The leakage current through R_2 can be eliminated by introducing a second diode D_2 in series with that. This will make the output identical if R₁ and R₂ are identical. See the image above. The corresponding simulation file is File:555 diodes2 300 300.circuitjs.txt.