Antenna Design and NanoVNA

Introduction

NanoVNA is a simple but powerful tool to analyze antennas.

VNA: Vector Network Analyzer

SWR: Standing Wave Ratio measures the degree of mismatch between a transmission line and its load. SWR is a measure of what is happening to the forward and reflected voltage waveforms and how they compare in size.

Theory

Calibration

NanoVNA should be calibrated

Antenna Measurements

Use Port 1 when measuring one port devices.

NanoVNA draws the measurement result on the screen as a graph of the measured quantity versus frequency or on the Smith Chart.

M1: Marker position

Before each measurement:

• which traces we want to display (up to four or three plus Smith Chart)
  • DISPLAY -> CHANNEL -> CH0 Reflect for antennas.
• trace channel (CH0 REFLECT or CH1 THROUGH) for each trace separately
  • DISPLAY -> TRACE. Click multiple times.
  • Active Trace.
• trace format (unit of measurement of each format)
• scale (how many units of measurement per each horizontal line, for each trace separately)
• reference position for each trace separately
• sweep frequency (stimulus frequency range)
• calibrate the NanoVNA