DIY: PVC Flute

From wikiluntti
Revision as of 13:05, 30 August 2023 by Mol (talk | contribs) (Created page with "== Introduction == PVC Flute == Theory == == Instructions == * 30 mm same pipe; Cut in half. Mark the center * 410 mm electric pvc pipe. Locate 22 mm from the end; and glue the 30mm pipe. Drill the mark 9.5 mm drill bit. * 20 mm wood dowel as a block * Gradually shorten the pipe until you get A * Make the other holes. == References == Nicholas Brass https://www.youtube.com/watch?v=Obpa9bzpzvQ")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

PVC Flute

Theory

Instructions

  • 30 mm same pipe; Cut in half. Mark the center
  • 410 mm electric pvc pipe. Locate 22 mm from the end; and glue the 30mm pipe. Drill the mark 9.5 mm drill bit.
  • 20 mm wood dowel as a block
  • Gradually shorten the pipe until you get A
  • Make the other holes.



References

Nicholas Brass https://www.youtube.com/watch?v=Obpa9bzpzvQ

Retrieved from "https://wiki.luntti.net/index.php?title=DIY:_PVC_Flute&oldid=10992"