Arduino Canbus Dashboard

Introduction

Empty

Dashboard is an Instrument cluster or ICM instrument cluster module.

CAN standards

A controller area network bus (CAN bus) is a vehicle bus standard.

• Differential signaling
• CRC

ECU Electronic Control Unit

CAN 2.0 (classical CAN)

• eight bytes
• a typical baud rate of 500 kbit/s
• CAN2.0A, CAN2.0B,

CAN FD (releases 2012).

Some de facto standards for mechanical implementation: 9-pin D-sub type male connector

• pin 2: CAN-Low (CAN−)
• pin 3: GND (ground)
• pin 7: CAN-High (CAN+)
• pin 9: CAN V+ (power)

CAN C - Engine CAN (also known as chassis CAN): Fast communication speeds 125 kbps or 500 kbps

CAN B - Interior CAN (also known as body CAN): Communication speed 83 kbps

CAN and Arduino

Arduino shield

OBD2

On-Board Diagnostic protocols or the OBD2.

CAN bus and Grafana

Grafana-Athena

https://www.csselectronics.com/pages/telematics-dashboard-open-source

MB

General

https://www.benzworld.org/threads/the-230-can-bus-and-how-to-test.1988297/

• X connector

https://www.benzworld.org/threads/troubleshooting-the-can-bus.1989185/ W220 CAN B

• X30/6
• X30/5
• X30&4
• green and white cables; clip to open.

CAN NETWORK REPAIR GUIDE.pdf https://mbworld.org/forums/attachments/cl-class-w215-6/easy-can-network-repair-guide-735364/can-network-repair-guide-423584d1578925674

• Wake-up signal: Door switch, rear SAM, EIS, N70
• Reference Materials for Further Reading
  • GF00.19-P-0001PP Extended vehicle network function
  • SN00.19-P-0004GH Complete networking (163 as of 9/01)
  • GF54.00-P-0004A Data bus system function
  • GF54.00-P-0005A CAN data bus, function
  • GF54.00-P-0005-01A CAN data bus data telegram
  • GF54.00-P-0005-02A CAN data bus specification
  • GF54.00-P-0005-04A CAN data bus applications
  • GF54.00-P-0999ZZ CAN data bus, contents, function description
• W203: CAN H 0.65/0.025V, CAN L 4.65/11.0V
• X30/6. C215/220: A1 - Instrument Cluster
• W11: Can C & B: A1 ICM Instrument Cluster

Instrument clusters eg dashboard

"The instrument cluster has its own Robert Bosch CAN and not included here"

https://www.benzworld.org/threads/open-source-project-for-w211-219-209-203-owners-to-add-functionality-to-the-oem-instrument-cluster.3047965/

• 211/209/203/219 series
• an Arduino and packet capturing / analysis
• Xentry shows all the CAN ID's
• rnd-ash/W203-canbus https://github.com/rnd-ash/W203-canbus

https://github.com/rnd-ash/MBUX-Port

https://github.com/rnd-ash/mercedes-hacking-docs/blob/master/Chapter%207%20In%20Car%20Entertainment.md

• W203 (C class 2001-2007), W211 (E class 2003-2009), W215 (CL class 1998-2006), W220 (S class 1998-2005), W230 (SL class 2001-2007)
• Shows the connection diagram!
• Needs 2x 16Mhz Canbus shields

https://www.benzworld.org/threads/programming-the-instrument-cluster.3133946/

• W210s with FSS (1998+) https://manual.startekinfo.com/manual/JSP/ic1/1_14/m13.jsp
• via CAN Bus from Traction systems control module (N47):
• Odometer, trip odometer
• Electronic speedometer
• Low brake fluid level/parking brake indicator (only parking signal is sent via CAN Bus)
• Warning lamp brake pad wear
• ABS indicator
• ETS, ASR, ESP indicator
• Warning lamp ETS, ASR, ESP

CarCluster https://github.com/r00li/CarCluster

• VW Polo 5, VW Golf 7, Škoda Superb 2, etc.

https://projecthub.arduino.cc/databus100/digital-speedometer-to-cars-instrument-cluster-via-can-bus-9ee5ca