NTC calibration and multiple temperature sensors

Introduction

Calibration of NTC sensors and different

NTC

Negative Temperature Coefficient, NTCLE100E3101JB0 or similar (MF52B NTC Thermistor). The NTC is connected in series with a "shunt" resistor $R_{1}$, see Measurement of resistors: voltage divider. The total resistance of the circuit is $R=R_{1}+R_{NTC}$, which gives

Failed to parse (syntax error): {\displaystyle \begin{align*} R_{NTC} &= \frac{U_\text{measured}}{U-U_\text{measured}}R_1 \\ \end{align*} }

Failed to parse (syntax error): {\displaystyle \begin{align*} R_{NTC} &= \frac{U_\text{measured}}{U-U_\text{measured}}R_1 \\ \end{align*} }

= LM35DZ

==