Diy Christmas lights: Difference between revisions

From wikiluntti
Line 6: Line 6:


Use leds in series, as parallel leds might light on uneven brightness.  
Use leds in series, as parallel leds might light on uneven brightness.  
Usually the longer led is the + lead.


=== LEDs and wiring ===  
=== LEDs and wiring ===  

Revision as of 20:02, 13 November 2022

Introduction

Make a simple battery powered Christmas light with seven (7) leds.

Theory

Use leds in series, as parallel leds might light on uneven brightness.

Usually the longer led is the + lead.

LEDs and wiring

  • Red and yellow led: 2 V
  • Green and blue led: 2.9 V
  • White: 3.3 V

Seven blue leds makes , and white blue leds drops the voltage by . If we use simple AA batteries, we will need or Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle 16\times 1.5=24V} . Quite many. . .

However, if we wire them alternately, it makes Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle 3\times 2.9V=8.7V} and Failed to parse (SVG (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle 4\times2.9V=11.6V} for blue leds and Failed to parse (SVG (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle 3\times3.3V=9,9V} and Failed to parse (SVG (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle 4\times3.3V=13,2V} the white leds. Thus, we need only six (6) or eight (8) batteries; or 7 and 9 in the case of white leds.

Photodiode and transistors

We can use a photodiode and transistor to turn a led on. The example given by EviMadScientist uses

  • a battery,
  • an LTR-4206E phototransistor (in a black package: blocks visible light; sensitive to IR)
  • a 2N3904 transistor,
  • and a 1 k resistor.
A simple photodiode circuit by EvilMadScientist


https://www.evilmadscientist.com/2007/a-simple-and-cheap-dark-detecting-led-circuit/

result