Cansat: Difference between revisions
(→Theory) |
|||
Line 29: | Line 29: | ||
=== Materials === | === Materials === | ||
All material (except for the third mission) is included in the Cansat shield. | All material (except for the third mission) is included in the Cansat shield. We need | ||
* Arduino | |||
* Circuit Board (cansat shield) | |||
* USB Cable for programming | |||
* Antenna | |||
* Battery connector | |||
* Data logger (SD Card reader) | |||
* Male pin connectors | |||
* Temperature sensor | |||
* Resistor for T sensor | |||
* Header Sockets | |||
* Dip jumpers | |||
* GY-91 10 DOF MPU | |||
* APC 220 Radio | |||
* Usb Connector for radio | |||
* And solder, soldering iron and soldering stand. | |||
Below is some older data. | |||
* Temperature sensor NTCLE100E3103JB0 | * Temperature sensor NTCLE100E3103JB0 |
Revision as of 19:13, 18 April 2022
Introduction
Cansat Finland 2022: https://www.esero.fi/cansat2022
- https://www.esero.fi/cb7-etusivu
- https://docs.google.com/document/d/1bruEN23qnMu5oZSze9UNT5XXQ5hISCS8Bi35CEtzGw4/edit
Cansat ver 3.20 https://esero.no/wp-content/uploads/2016/02/The-CanSat-Book-R2.13.pdf includes a list of pins. The Norwegian page https://www.narom.no/undervisningsressurser/the-cansat-book/introduction-to-cansat/ is rather comprehensive.
The Instructables portal has a page or two on Cansat, see https://www.instructables.com/CanSat-Beginners-Guide/
http://www.stensat.org/docs/cansat_lessons.pdf
https://www.slideshare.net/wenjiun/sl-14777621
Some publications:
- https://www.researchgate.net/publication/261210334_Model_satellite_design_for_CanSat_Competition
- https://www.researchgate.net/publication/325388316_CanSat_design_and_their_applications
Theory
This uses the Cansat shield made by Narom, Andøya Space Center. See constructing the cansat shield for more information about the shield. This intro is for version number 7, but I assume that all versions are about the same.
Materials
All material (except for the third mission) is included in the Cansat shield. We need
- Arduino
- Circuit Board (cansat shield)
- USB Cable for programming
- Antenna
- Battery connector
- Data logger (SD Card reader)
- Male pin connectors
- Temperature sensor
- Resistor for T sensor
- Header Sockets
- Dip jumpers
- GY-91 10 DOF MPU
- APC 220 Radio
- Usb Connector for radio
- And solder, soldering iron and soldering stand.
Below is some older data.
- Temperature sensor NTCLE100E3103JB0
- Resistor 10 kOhm.
- GY-91 (BMP-280, MPU-9255)
Or
- MPX4115a
- LM35DZ
- NTC
- GPS Module
- Anything else
Building
See the Finnish version at https://www.esero.fi/cb7-sivu5.
Parachute
Vähimmäislaskeutumisnopeus: 8 m/s Enimmäislaskeutumisnopeus: 11 m/s Sallittu massa: 300–350 g ilmanvastuskertoimet: Puolipallon muotoinen: 1,5 Ristin muotoinen: 0,8 Liitovarjo: vaihtelee muodon mukaan (voidaan määrittää testeillä) Tasainen, kuusikulmainen: 0,8
http://www.nakka-rocketry.net/paracon.html
Terminaalinopeudessa eli tasaisessa nopeudessa gravitaatiovoima on sama kuin laskuvarjon hidastusvoima.
Puolipallo/ ellipsi
Risti
Liitovarjo
Tasainen kuusikulmainen
Pyörivä
Tom stanton