Arduino Led Matrix 8x7 WS2811: Difference between revisions
From wikiluntti
| Line 18: | Line 18: | ||
== Programming == | == Programming == | ||
See the gist file for a sample code to show some letters: https://gist.github.com/markkuleino/65c1d48b05597e7f92b15a47b3d49435 | * See the gist file for a sample code to show some letters: https://gist.github.com/markkuleino/65c1d48b05597e7f92b15a47b3d49435 | ||
The 7x8 font https://github.com/ileskanRepot/Arduino_RGB_WS2811_8_leds/blob/master/wave/wave.c/letters.h | * The 7x8 font https://github.com/ileskanRepot/Arduino_RGB_WS2811_8_leds/blob/master/wave/wave.c/letters.h | ||
* Turn the bits on randomly https://gist.github.com/markkuleino/294b4248aa3d154f179ef8b6f625ac40.js | |||
=== Debugging === | |||
void setup() { | |||
Serial.begin(9600); // open the serial port at 9600 bps: | |||
} | |||
Serial.print(); | |||
Revision as of 21:19, 30 July 2021
Introduction
Make a 7x8 led matrix using WS2811 led strips.
Theory
Building the box
Wiring
Be careful to wire +5V to +5V (I broke one led). Soldering the leds is manageable: add the solder to both the led connector and to the wire, the attach the wire to the led connector and warm it using the soldering iron.
-
Programming. No +5V is needed.
-
Running only.
Programming
- See the gist file for a sample code to show some letters: https://gist.github.com/markkuleino/65c1d48b05597e7f92b15a47b3d49435
- The 7x8 font https://github.com/ileskanRepot/Arduino_RGB_WS2811_8_leds/blob/master/wave/wave.c/letters.h
- Turn the bits on randomly https://gist.github.com/markkuleino/294b4248aa3d154f179ef8b6f625ac40.js
Debugging
void setup() {
Serial.begin(9600); // open the serial port at 9600 bps:
}
Serial.print();
