Arduino controlled hydrophonic system: Difference between revisions
From wikiluntti
(→1.) |
|||
| Line 57: | Line 57: | ||
* Water pump | * Water pump | ||
* Growing light | * Growing light | ||
* Nutrient feeder | * Nutrient feeder from a fish feeder. | ||
=== 2. === | === 2. === | ||
Revision as of 18:50, 27 February 2026
Introduction
Grow strawberries, strawberry
IoT Home growing system
Two irrigation categories
- Sub-irrigation systems: nutrient solution is supplied from below and roots absorb moisture upward
- Top-irrigation systems: nutrient solution is applied from above through drip emitters or sprayers
- Static solution
- Continuous-flow solution
- NFT (nutrient film technique)
- Ebb and flow (flood and drain)
Substrates
- Rock wool
- Expanded clay aggregate
- Coconut coir
- Growstones
- Perlite / Vermiculite
- Wood fiber
Aerophonics
Aquaphonics
- combines aquaculture with hydrophonics
Theory
1.
The following is a short version of https://www.instructables.com/Arduino-Controlled-Smart-Hydroponic-Modular-System/ by Innovart Studio.
ESP32 instead of arduino: Easier to upload data into a web server.
Structure
- PVC pipes (100 mm, 40mm), connectors,
- Tank in which the water of the system falls
Parameters:
- Air temperature and humidity
- Water temperature
- pH
- Conductivity
- Time
Actuators
- Water pump
- Growing light
- Nutrient feeder from a fish feeder.
2.
1.
2.
References
https://www.instructables.com/Arduino-Controlled-Smart-Hydroponic-Modular-System/
