Laser cutter: Difference between revisions
From wikiluntti
(→Models) |
(→Models) |
||
| Line 11: | Line 11: | ||
| Neje3 || $400 || 170 x 170 mm2 || 5.5-7.5W | | Neje3 || $400 || 170 x 170 mm2 || 5.5-7.5W | ||
|- | |- | ||
| Twotrees TTS-55 pro 40W || $200 || 300 x 300 mm2 | | Twotrees TTS-55 pro 40W || $200 || 300 x 300 mm2 || 5W | ||
|- | |- | ||
| Creality Falcon 10W || 640€ || 400 x 415mm2 || 10W | | Creality Falcon 10W || 640€ || 400 x 415mm2 || 10W | ||
|- | |- | ||
| | | Ikier X5 Pro || 230€ || 410x380mm || 5W | ||
|- | |||
| Creality Falcon 5W || 260€ || 400x415mm || 5W | |||
|} | |} | ||
* The laser spot area | |||
* 10,000mW output power and laser class 4, which can cut a 12mm wood board or 3mm black acrylic in one pass at a speed up to 10mm/min. | * 10,000mW output power and laser class 4, which can cut a 12mm wood board or 3mm black acrylic in one pass at a speed up to 10mm/min. | ||
* anti-UV acrylic filter in the eye protection module, | * anti-UV acrylic filter in the eye protection module, | ||
Revision as of 11:48, 1 November 2025
Introduction
Cheap and simple, relative small, to cut plywood.
Models
| Name | Price | Cutting area | Power |
|---|---|---|---|
| Neje3 | $400 | 170 x 170 mm2 | 5.5-7.5W |
| Twotrees TTS-55 pro 40W | $200 | 300 x 300 mm2 | 5W |
| Creality Falcon 10W | 640€ | 400 x 415mm2 | 10W |
| Ikier X5 Pro | 230€ | 410x380mm | 5W |
| Creality Falcon 5W | 260€ | 400x415mm | 5W |
- The laser spot area
- 10,000mW output power and laser class 4, which can cut a 12mm wood board or 3mm black acrylic in one pass at a speed up to 10mm/min.
- anti-UV acrylic filter in the eye protection module,
- Emergency stop
