Laser cutter: Difference between revisions
From wikiluntti
(→Models) |
(→Models) |
||
| Line 13: | Line 13: | ||
| Twotrees TTS-55 pro 40W || $200 || 300 x 300 mm2 || 5.5W || Example || Example | | Twotrees TTS-55 pro 40W || $200 || 300 x 300 mm2 || 5.5W || Example || Example | ||
|- | |- | ||
| | | Creality Falcon 10W || 640€ || 400 x 415mm2 || 10W || Example || Example | ||
|- | |- | ||
| Example || Example || Example || Example || Example || Example | | Example || Example || Example || Example || Example || Example | ||
| Line 19: | Line 19: | ||
* | |||
* 10,000mW output power and laser class 4, which can cut a 12mm wood board or 3mm black acrylic in one pass at a speed up to 10mm/min. | |||
* anti-UV acrylic filter in the eye protection module, | |||
* Emergency stop | |||
* | * | ||
Revision as of 11:45, 1 November 2025
Introduction
Cheap and simple, relative small, to cut plywood.
Models
| Name | Price | Cutting area | Power | Header text | Header text |
|---|---|---|---|---|---|
| Neje3 | $400 | 170 x 170 mm2 | 5.5-7.5W | Example | |
| Twotrees TTS-55 pro 40W | $200 | 300 x 300 mm2 | 5.5W | Example | Example |
| Creality Falcon 10W | 640€ | 400 x 415mm2 | 10W | Example | Example |
| Example | Example | Example | Example | Example | Example |
- 10,000mW output power and laser class 4, which can cut a 12mm wood board or 3mm black acrylic in one pass at a speed up to 10mm/min.
- anti-UV acrylic filter in the eye protection module,
- Emergency stop
