Arduino 1.77" display: Difference between revisions
From wikiluntti
| Line 9: | Line 9: | ||
!Name | !Name | ||
!Purpose | !Purpose | ||
! | !No needed? | ||
! | !Constructor 2! | ||
|- | |- | ||
|3.3V | |3.3V | ||
Revision as of 17:16, 3 December 2024
Introduction
Connections and Libraries
| Arduino | Display | Name | Purpose | No needed? | Constructor 2! |
|---|---|---|---|---|---|
| 3.3V | 8 LEDA | Lite | Backlight control | ||
| 10 | 7 CS | Chip Select / DC (Data/Command) | SS PIN / SPI data or command selector [SS = Slave Select] | Yes | Yes |
| 9 | 6 RS | Register Selection | MISO - Sending to Master | Yes | Yes |
| 8 | 5 RES | Reset / RST | Reset the TFT | Yes | Yes |
| 11 | 4 SDA | Serial Data | MOSI - Sending to Slave | Yes | |
| 13 | 3 SCK | SCLK - Clock Line | SPI Clock Input | Yes | |
| 5V | 2 VCC | Voltage Common Collector | |||
| GND | 1 GND | Ground | Ground |
Download library:
