RTL-SDR AIS Ship Tracking: Difference between revisions

From wikiluntti
Line 1: Line 1:
== Introduction ==
== Introduction ==


Need a radio dongle, antenna. Use Arduino and RPi.  
* AIS: Automatic Identification System.
* RTL
* SDR: Software Defined Radio
 
Need a radio dongle, antenna. Use Arduino and RPi.


== Theory ==
== Theory ==

Revision as of 09:28, 13 June 2024

Introduction

  • AIS: Automatic Identification System.
  • RTL
  • SDR: Software Defined Radio

Need a radio dongle, antenna. Use Arduino and RPi.

Theory

https://www.rtl-sdr.com/rtl-sdr-tutorial-cheap-ais-ship-tracking/


Radio Dongle

https://www.rtl-sdr.com/buy-rtl-sdr-dvb-t-dongles/

https://www.ebay.com/str/rtlsdrblog

https://www.ebay.com/itm/283144516411?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338814417&customid=&toolid=20012&mkevt=1

Antenna

The frequency of AIS signal is 161.975 MHz and 162.025 MHz, and have the max range of about 70 km.

Quarter wave / dipole. One vertical 1/4 wave element connected to the center of the coax cable and 4 (or more) more grounding elements pointing towards the the ground at 45 deg.

Coax collinear antenna. Very high omnidirectional gain. Multiple short coax cables where the outer conductor is connected to the inner conductor in an alternating fashion.

Yagi antenna. Very directional antenna that will pick up signals in the direction it is pointed: Very large gain.

Slim Jim.

Refs:

Programming

References