Pimoroni Galactic Unicorn Hello World: Difference between revisions
From wikiluntti
| Line 9: | Line 9: | ||
Raspberry Pi Pico can be programmed using Micropython or C/C++. This will deal only with MicroPython. | Raspberry Pi Pico can be programmed using Micropython or C/C++. This will deal only with MicroPython. | ||
To upload your file to Pico, it need to be put into bootloader mode: hold down the '''bootsel''' button while plugging the USB cable: it should show up as a drive called RPI-RP2. | |||
== Fonts == | == Fonts == | ||
Revision as of 10:51, 30 September 2023
Introduction
583 RGB leds in 53x11 grid. Raspberry Pi Pico W (microcontroller), speaker with amplifier, two (2) I2C Stemma/qt sensor sockets, a light sensor (phototransistor) facing front and nine (9) control buttons, a reset button, JST-PH battery connector.
Connecting
Programming
Raspberry Pi Pico can be programmed using Micropython or C/C++. This will deal only with MicroPython.
To upload your file to Pico, it need to be put into bootloader mode: hold down the bootsel button while plugging the USB cable: it should show up as a drive called RPI-RP2.
Fonts
Stationary, centred, scrolling text.
