DIY: PVC Flute: Difference between revisions

From wikiluntti
(Created page with "== Introduction == PVC Flute == Theory == == Instructions == * 30 mm same pipe; Cut in half. Mark the center * 410 mm electric pvc pipe. Locate 22 mm from the end; and glue the 30mm pipe. Drill the mark 9.5 mm drill bit. * 20 mm wood dowel as a block * Gradually shorten the pipe until you get A * Make the other holes. == References == Nicholas Brass https://www.youtube.com/watch?v=Obpa9bzpzvQ")
 
Line 11: Line 11:
* 20 mm wood dowel as a block
* 20 mm wood dowel as a block
* Gradually shorten the pipe until you get A
* Gradually shorten the pipe until you get A
* Make the other holes.
* Make the other holes a millimeter smaller than indicated in the blueprint.
 
 
 


== References ==
== References ==


Nicholas Brass https://www.youtube.com/watch?v=Obpa9bzpzvQ
Nicholas Brass https://www.youtube.com/watch?v=Obpa9bzpzvQ

Revision as of 13:36, 30 August 2023

Introduction

PVC Flute

Theory

Instructions

  • 30 mm same pipe; Cut in half. Mark the center
  • 410 mm electric pvc pipe. Locate 22 mm from the end; and glue the 30mm pipe. Drill the mark 9.5 mm drill bit.
  • 20 mm wood dowel as a block
  • Gradually shorten the pipe until you get A
  • Make the other holes a millimeter smaller than indicated in the blueprint.

References

Nicholas Brass https://www.youtube.com/watch?v=Obpa9bzpzvQ