Optimal way to cut boards to given length: Difference between revisions
From wikiluntti
(→Parts) |
|||
| Line 2: | Line 2: | ||
Problem: Need to cut 6×110 cm similar pieces from 4×200 cm wood. The parts can be glued together, but the gluing should be somehow symmetrical. Also the kerf (the width of the blade) should be considered. | Problem: Need to cut 6×110 cm similar pieces from 4×200 cm wood. The parts can be glued together, but the gluing should be somehow symmetrical. Also the kerf (the width of the blade) should be considered. | ||
== Parts == | == Parts == | ||
== Optimization == | |||
Consider | |||
== References == | == References == | ||
https://bland.ltd/cutlist/ (https://jonathan.overholt.org/projects/cutlist) | https://bland.ltd/cutlist/ (https://jonathan.overholt.org/projects/cutlist) | ||
Revision as of 14:04, 8 August 2025
Introduction
Problem: Need to cut 6×110 cm similar pieces from 4×200 cm wood. The parts can be glued together, but the gluing should be somehow symmetrical. Also the kerf (the width of the blade) should be considered.
Parts
Optimization
Consider
References
https://bland.ltd/cutlist/ (https://jonathan.overholt.org/projects/cutlist)
