Jyrsin Elektra Beckum TF100 M: Difference between revisions
From wikiluntti
| Line 31: | Line 31: | ||
* For a spindle speed of 7500 min<sup>-1</sup> the minimum tool diameter is 90 mm. | * For a spindle speed of 7500 min<sup>-1</sup> the minimum tool diameter is 90 mm. | ||
* At both spindle speeds suitable for moulding (6000 and 7500 min<sup>-1</sup>) the max permissible tool diameter is 150 mm | * At both spindle speeds suitable for moulding (6000 and 7500 min<sup>-1</sup>) the max permissible tool diameter is 150 mm | ||
Spindle speed setting: Loosen the ratchet lever and place belt on the desired step of the pulleys. Available speeds are: | |||
* top: 4000 min<sup>-1</sup> | |||
* centre: 6000 min<sup>-1</sup> | |||
* lower: 7500 min<sup>-1</sup> | |||
== Teriä == | == Teriä == | ||
Revision as of 19:04, 24 April 2025
Johdanto
Pöytäjyrsinkone, spindle moulder (table router?)
Teknisia tietoja TF 100 M/2,8 DN
- työstökorkeus: 850 mm
- pöydän porausreikä: d = 850mm
- supistusrenkaat 2 kpl
- imuistukka d = 100 mm
- työkalun läpimitta enintään dmax = 150 mm
- työkalun paksuus enintään 60 mm
- karan läpimitta d = 30 mm
- jyrsinkaran rengas d = 50 mm
- karan liike 100 mm
- karan pyörimisnopeus 4000/ 6000/ 7500 rmp
- jyrsinkaran mutteru M 30x2
- jyrsinkaran renkaat x25 mm, 1x16mm, 2x10mm, 2x8mm, 2x5mm
BG-tarkastustyökalut!
Käyttövipu (takana) alhaalla kiristää (ylhäällä ehkä löystää?).
Safety Instructions
To reduce the risk of kickback the cutting speed of the tool used must be greater than 35 m/s.
- Moulding tools cannot safely be used at the lowest speed setting of 4000 min-1. This speed is intended for use with brushes, wobble saws and similar tools.
- For a spindle speed of 6000 min-1 the tool must have a minimum diameter of 115 mm.
- For a spindle speed of 7500 min-1 the minimum tool diameter is 90 mm.
- At both spindle speeds suitable for moulding (6000 and 7500 min-1) the max permissible tool diameter is 150 mm
Spindle speed setting: Loosen the ratchet lever and place belt on the desired step of the pulleys. Available speeds are:
- top: 4000 min-1
- centre: 6000 min-1
- lower: 7500 min-1
