Arduino radio hc-12: Difference between revisions
From wikiluntti
(Created page with "== Introduction == LoRa, hc12, hc-12 * Frequency band is from 433.4 MHz to 473.0 MHz * 100 channels with a stepping of 400 KHz between each channel * Transmitting power is from -1dBm (0.79mW) to 20dBm (100mW). A half-duplex 20 dBm (100 mW) transmitter * Receiving sensitivity is from -117dBm (0.019pW) to -100dBm (10pW) Connect a 22 µF to 1 mF reservoir capacitor in parallel with the HC-12 "Gnd" and "Vcc" pins. == Set == == Transmission Tx == == Receive Rx ==") |
|||
| Line 13: | Line 13: | ||
== Set == | == Set == | ||
== | == Transmit Tx == | ||
== Receive Rx == | == Receive Rx == | ||
Revision as of 17:23, 20 January 2025
Introduction
LoRa, hc12, hc-12
- Frequency band is from 433.4 MHz to 473.0 MHz
- 100 channels with a stepping of 400 KHz between each channel
- Transmitting power is from -1dBm (0.79mW) to 20dBm (100mW). A half-duplex 20 dBm (100 mW) transmitter
- Receiving sensitivity is from -117dBm (0.019pW) to -100dBm (10pW)
Connect a 22 µF to 1 mF reservoir capacitor in parallel with the HC-12 "Gnd" and "Vcc" pins.
