CR-Laser Falcon 10W Creality: Difference between revisions

From wikiluntti
VisualWikitext
 
(9 intermediate revisions by the same user not shown)
Line 209: Line 209:


== Air Assist ==
== Air Assist ==
It is not recommended to use an air assist during engraving---it may cause the blown molten material to sputter over the workpiece.
Air Assist for Creality Falcon 10W
* https://www.thingiverse.com/thing:5868323
* 5W: https://www.thingiverse.com/thing:5525519


https://www.instructables.com/DIY-Cheap-and-Quiet-Air-Assist-for-Laser-Cutting/
https://www.instructables.com/DIY-Cheap-and-Quiet-Air-Assist-for-Laser-Cutting/
Line 214: Line 221:
* Air tube (4mm inner diameter, 6mm outer diameter)
* Air tube (4mm inner diameter, 6mm outer diameter)
* resin printer
* resin printer
https://mellowpine.com/how-to-build-an-air-assist-for-your-laser/
* 0.5 - 1.0 hp (400-750) ; 150 psi (10 bar; 1 Mpa)
* An air pressure regulator with a filter to prevent moisture etc
https://endurancelasers.com/a-diy-air-assist-for-diode-lasers-fully-3d-printed/
* 0.05-0.1MPA pressure. At least 60-70 l/min airflow
* ver 1.0: Airflow from the left side of the laser.
* ver 2.0: Airflw is directed exactly to the point of action of the laser
* https://www.thingiverse.com/thing:4067540 and https://www.thingiverse.com/thing:4516272 and https://www.thingiverse.com/thing:4544637 and https://www.thingiverse.com/thing:3652414

Latest revision as of 20:21, 29 April 2026

Introduction

Caption text
Header text Header text
Machine Power Max. 72 W
Laser Power 10 W
Laser Spot 0.06 mm
Laser Wave Length 455±5 mm
Engraving Speed Max. 10000mm/min
Engraving Area 400mm×415mm
Certification IEC60825, FDA, CE, RoHS, FCC, UKCA, UL, PSE
Control Software LightBurn, LaserGRBL
Product Dimensions（L×W×H） 568×632×198 mm3
Laser Engraving Materials Paper, Wood, Bamboo, Rubber Sheet, Leather, Fabrics, Acrylics, Painted Metal, Plastics, etc.
Laser Cutting Materials Paper, Wood, Bamboo, Cloth, Leather, Fabrics, PVC, Acrylics, Plastics, etc.

Enclosure


https://www.pinterest.com/pin/43558321378919713/

https://www.artofit.org/image-gallery/604186106280835560/diy-laser-enclosure/

https://www.instructables.com/Plywood-and-Acrylic-Laser-Enclosure-With-Exhaust-F/

https://glowlaserengraver.com/building-your-own-diy-laser-engraver-enclosure-a-step-by-step-guide/

Usage

Parameters

Engraving

Material Thickness (mm) Power Speed (mm/min) Passes
Basswood 2 40% 3000 1
Bamboo 5 40% 3000 1
Kraft paper 0.2 25% 3000 1
Red card paper 0.2 25% 3000 1
Red felt 0.8 15% 3000 1
Brown leather 0.65 20% 3000 1
Black acrylic 4.5 50% 3000 1
Anodized aluminum 3 100% 200 1
Stainless steel 2 100% 500 1
White ceramic tile painted black 6 95% 3800 1

Cutting

Material Thickness (mm) Power Speed (mm/min) Passes
Basswood 2 100% 350 1
4 100% 200 1
5 100% 150 1
6 100% 230 3
Bamboo 5 100% 230 3
Black acrylic 4.5 100% 120 2
Kraft paper 0.2 100% 3500 1
Red card paper 0.2 100% 3500 1
Red felt 0.8 100% 3500 1
Brown leather 0.65 100% 1500 1

Online Box creators

Boxes, drawers, organizers.

https://boxes.hackerspace-bamberg.de/

https://3axis.co/laser-cut/drawers/

https://www.makercase.com/

Air Assist

It is not recommended to use an air assist during engraving---it may cause the blown molten material to sputter over the workpiece.

Air Assist for Creality Falcon 10W


https://www.instructables.com/DIY-Cheap-and-Quiet-Air-Assist-for-Laser-Cutting/

  • Air pump (30L/min is more than enough
  • Air tube (4mm inner diameter, 6mm outer diameter)
  • resin printer

https://mellowpine.com/how-to-build-an-air-assist-for-your-laser/

  • 0.5 - 1.0 hp (400-750) ; 150 psi (10 bar; 1 Mpa)
  • An air pressure regulator with a filter to prevent moisture etc

https://endurancelasers.com/a-diy-air-assist-for-diode-lasers-fully-3d-printed/

Retrieved from "https://wiki.luntti.net/index.php?title=CR-Laser_Falcon_10W_Creality&oldid=15862"