SCD-30 and GY-91: Difference between revisions
From wikiluntti
(Created page with "== Introduction == Use SCD-30 and GY-91 sensors. First, use Examples -> Wire -> I2C_scanner to find the addresses. <pre> Scanning... I2C device found at address 0x61 ! I2C device found at address 0x68 ! I2C device found at address 0x76 ! done </pre>") |
(No difference)
|
Revision as of 16:03, 23 March 2023
Introduction
Use SCD-30 and GY-91 sensors. First, use Examples -> Wire -> I2C_scanner to find the addresses.
Scanning... I2C device found at address 0x61 ! I2C device found at address 0x68 ! I2C device found at address 0x76 ! done
