View source for CR-Laser Falcon 10W Creality

== Introduction ==

{| class="wikitable"
|+ Caption text
|-
! Header text !! Header text
|-
| Machine Power || Max. 72 W
|-
| Laser Power  || 10 W
|-
| Laser Spot || 0.06 mm
|-
| Laser Wave Length || 455±5 mm
|-
| Engraving Speed || Max. 10000mm/min
|-
| Engraving Area || 400mm×415mm
|-
| Certification || IEC60825, FDA, CE, RoHS, FCC, UKCA, UL, PSE
|-
| Control Software || LightBurn, LaserGRBL
|-
| Product Dimensions（L×W×H） || 568×632×198 mm<sup>3</sup>
|-
| Laser Engraving Materials || Paper, Wood, Bamboo, Rubber Sheet, Leather, Fabrics, Acrylics, Painted Metal, Plastics, etc.
|-
| Laser Cutting Materials || Paper, Wood, Bamboo, Cloth, Leather, Fabrics, PVC, Acrylics, Plastics, etc.
|}

=== Enclosure ===

<gallery>
Laser enclosure.png|Not exact plans, but something. The blend file is [[File:Enclosure.zip]]

</gallery>


https://www.pinterest.com/pin/43558321378919713/

https://www.artofit.org/image-gallery/604186106280835560/diy-laser-enclosure/

https://www.instructables.com/Plywood-and-Acrylic-Laser-Enclosure-With-Exhaust-F/

https://glowlaserengraver.com/building-your-own-diy-laser-engraver-enclosure-a-step-by-step-guide/

== ==

== Usage ==

=== Parameters ===

Engraving
{| class="wikitable" 
|-
! Material
! Thickness (mm)
! Power
! Speed (mm/min)
! Passes
|-|-
| Basswood
| 2
| 40%
| 3000
| 1
|-
| Bamboo
| 5
| 40%
| 3000
| 1
|-
| Kraft paper
| 0.2
| 25%
| 3000
| 1
|-
| Red card paper
| 0.2
| 25%
| 3000
| 1
|-
| Red felt
| 0.8
| 15%
| 3000
| 1
|-
| Brown leather
| 0.65
| 20%
| 3000
| 1
|-
| Black acrylic
| 4.5
| 50%
| 3000
| 1
|-
| Anodized aluminum
| 3
| 100%
| 200
| 1
|-
| Stainless steel
| 2
| 100%
| 500
| 1
|-
| White ceramic tile painted black
| 6
| 95%
| 3800
| 1
|}

Cutting
{| class="wikitable" 
|-
! Material
! Thickness (mm)
! Power
! Speed (mm/min)
! Passes
|-
| rowspan="4" | Basswood
| 2
| 100%
| 350
| 1
|-
| 4
| 100%
| 200
| 1
|-
| 5
| 100%
| 150
| 1
|-
| 6
| 100%
| 230
| 3
|-
| Bamboo
| 5
| 100%
| 230
| 3
|-
| Black acrylic
| 4.5
| 100%
| 120
| 2
|-
| Kraft paper
| 0.2
| 100%
| 3500
| 1
|-
| Red card paper
| 0.2
| 100%
| 3500
| 1
|-
| Red felt
| 0.8
| 100%
| 3500
| 1
|-
| Brown leather
| 0.65
| 100%
| 1500
| 1
|}

=== ===


=== ===


=== ===

=== ===

=== Online Box creators ===

Boxes, drawers, organizers.

https://boxes.hackerspace-bamberg.de/

https://3axis.co/laser-cut/drawers/

https://www.makercase.com/

== Air Assist ==

It is not recommended to use an air assist during engraving---it may cause the blown molten material to sputter over the workpiece.

Air Assist for Creality Falcon 10W
* https://www.thingiverse.com/thing:5868323
* 5W: https://www.thingiverse.com/thing:5525519


https://www.instructables.com/DIY-Cheap-and-Quiet-Air-Assist-for-Laser-Cutting/
* Air pump (30L/min is more than enough
* Air tube (4mm inner diameter, 6mm outer diameter)
* resin printer

https://mellowpine.com/how-to-build-an-air-assist-for-your-laser/
* 0.5 - 1.0 hp (400-750) ; 150 psi (10 bar; 1 Mpa)
* An air pressure regulator with a filter to prevent moisture etc

https://endurancelasers.com/a-diy-air-assist-for-diode-lasers-fully-3d-printed/
* 0.05-0.1MPA pressure. At least 60-70 l/min airflow
* ver 1.0: Airflow from the left side of the laser. 
* ver 2.0: Airflw is directed exactly to the point of action of the laser
* https://www.thingiverse.com/thing:4067540 and https://www.thingiverse.com/thing:4516272 and https://www.thingiverse.com/thing:4544637 and https://www.thingiverse.com/thing:3652414